PVC Ready Urban Raised Bed

PVC for Site
PVC CaliIMG_E0406

Product Information

The Smart Pot Urban Raised Bed is offered in our Natural fabric and comes PVC ready.  The Urban Raised Bed supports 1″ PVC piping and fitting. (PVC is not included)

Available in 2 sizes:

  • 24″ by 48″ by 18″ tall – holds approximately 13.5 cubic feet of soil
  • 48″ by 48″ by 18″ tall – holds approximately 27 cubic feet of soil

Average lifespan is 3-5 years

(scroll down to purchase)

PVC piping and fitting is not included with this raised bed.  Here’s a list of what you will need and 6 easy steps to assemble it:

2’x4′ Urban Raised Bed

1 – 2’ x 4’ Urban Raised Bed
4 – 1” x 21 ¾ PVC Pipe
2 – 1” x 22” PVC Pipe
6 – 1” x 17 ½” PVC Pipe
2 – 1” PVC T’s
4 – 1” 3-way PVC fittings
12 – 1” self-tapping screws
13.5 cu.ft of soil

Here are the six easy steps:
1) Unfold your new Smart Pot Urban Garden Bed
2) Connect all four 17 ½” pieces of pipe separately to the 3-way fittings.
*Note: Use a sponge or cloth with soapy water to connect the fittings if you’re not going to use PVC glue.*
3) Slide one of the 21 ¾” pipes through the sleeve longwise and connect with the 3-way fitting. Slide the other 21 ¾ “ through and connect to the 3 way fitting.
4) Connect the two pieces of pipe in the middle with one PVC T and connect one 17 ½“ pipe downwards.
5) Slide the two 22” pipes through the sleeve widthwise and connect to the 3-way fitting
6) Screw 1 of the self-tapping screws on top of each 3-way fittings 1” from the end. Or use PVC glue for a permeate bond.

Check out our instructional YouTube video.

4’x4′ Urban Raised Bed

Here is what you need:
1 x 4′ x 4′ Urban Raised Bed Garden
8 x 1″ x 21.75″ PVC Pipe (4′ Side Supports)
8 x 1″ x 17.5″ PVC Pipe (Legs)
4 x 1″ PVC “T-Connections”
4 x 1″ PVC “3-Way-Connections)
27 cu.ft. of soil

Here are the six easy steps:
1) Unfold your new Smart Pot Urban Garden Bed
2) Connect all eight 17 ½” pieces of pipe separately to the 3-way fittings.
*Note: Use a sponge or cloth with soapy water to connect the fittings if you’re not going to use PVC glue.*
3) Slide one of the 21 ¾” pipes through the sleeve and connect with the 3-way fitting.
4) Slide the other 21 ¾ “ through and connect to the 3 way fitting.
5) Connect the two pieces of pipe in the middle with one PVC T and connect one 17 ½“ pipe downwards. Repeat steps 3 – 5 to connect the remaining pipes and fittings.
6) Screw 1 of the self-tapping screws on top of each 3-way fittings 1” from the end. Or use PVC glue for a permeate bond.

Check out our instructional YouTube Video.

 

Price:

$55.40$71.70

Clear selection
SKU: N/A Category:
X